|
|
PARACHUTES & PARTS
///
BACK TO TOP |
|
TRS MILD STEEL PARACHUTE MOUNT PLATE
The Race Spot Parachute Mount Plate is laser cut from 1/8" mild steel for any custom parachute mounting project. Mounting hole measurements from center-hole to center-hole are 7" width and 5.25" height and 8.75" diagonally." Weighs in at .8 pounds.
Universal Application.
TRS-PMP-MS |
|
SIMPSON RACING SKYJACKER PARACHUTE
These Simpson Skyjacker reinforced nylon parachutes utilize a handmade crossform design that's reliable and durable up to 200 mph. They have a 10 ft. plume, which extends 12 ft. from the car and uses a 12" pilot chute and compression launch spring. The 0.090" alloy mounting plate allows for bolt-on installation, and they include a Nomex chute pack and backing.
Universal Application.
42020BK,42020BL,42020R |
|
STROUD COMP ELIMINATOR 420 PARACHUTE
The Stroud Comp Eliminator 420 Parachute is in the perfect weight to MPH ratio for our applications. This chute is perfect for cars in the 2200-2600 pound range trapping 170-180 MPH in the 1/4
Universal Application.
STROUD-420-CHUTE |
|
STROUD PILOT CHUTE (LARGE)
Packed last, out first, Stroud Pilot Chutes will spring into action, deploying your main canopy behind it. Being first out these take quite a beating.
Universal Application.
472 |
|
STROUD PARACHUTE SAFETY FLAG
Stroud "Remove Before Flight" red parachute safety flag.
Universal Application.
475 |
|
STROUD SAFETY PARACHUTE LOOP KIT
The Stroud Safety Replacement Parachute Loop Kit includes 3 chords and 3 loops as pictured.
Universal Application.
477LOP |
|
MR. GASKET PARACHUTE WARNING FLAG
Designed to secure your parachute while working in the pits, waiting in staging lines or moving from one location to the other. The bright red flag with large letters reading "Remove Before Flight" allows your crew members to easily see the flag and know if it has been removed before you head down the track.
Universal Application.
6001 |
STAGING BRAKE
///
BACK TO TOP |
|
CNC UNIVERSAL STAGING BRAKE
CNC Series 412 Staging Brake features total-seal rubber boots and a straight, chrome handle. Does not affect or hinder foot brakes. Comes equipped with fittings for either standard American 3/16" inverted flare brake line or 10mm metric thread-bubble flare brake line.
Universal Application.
412SX3/4 |
|
CNC REPLACEMENT STAGING BRAKE KNOBS
CNC Replacement Staging Brake Knobs. Anodized aluminum, blue or red.
Universal Application.
1402B,1402R |
|
|
|