DSM
|
EVO
|
OEM
|
EVO X
|
3000GT
|
SUBARU
|
EVO X | INTERCOOLER | PIPES | COUPLERS | CLAMPS
Our On-Line Catalog and inventory is constantly growing. If you don't see what you need, give us a call. For questions and ordering call (585) 226-8226.
|
|
 |
|
|
STM SILICONE STRAIGHT COUPLERS
Gloss black, 4-ply, straight silicone couplers are available from 2" to 4" I.D. and come in a 3" length. We have searched out the very best silicone hose manufacturers and are proud to offer our own brand of STM silicone couplers. We would not put our name on these if they were nothing less than the best.
Click image for all applications.
|
|
|
|
STM SILICONE HUMP COUPLERS
Gloss black, 4-ply, hump silicone couplers are available from 2" to 4" I.D. and come in a 3" length. We have searched out the very best silicone hose manufacturers and are proud to offer our own brand of STM silicone couplers. We would not put our name on these if they were nothing less than the best.
Click image for all applications.
|
|
|
|
STM SILICONE REDUCER COUPLERS
Gloss black, 4-ply, straight silicone couplers are available in a wide assortment of sizes and come in a 3" length. We have searched out the very best silicone hose manufacturers and are proud to offer our own brand of STM silicone couplers. We would not put our name on these if they were nothing less than the best.
Click image for all applications.
|
|
|
|
STM SILICONE ELBOW COUPLERS
Gloss black, 4-ply silicone elbow couplers are available in 45° and 90° bends, standard (10" legs) and reducers (6" legs). We have searched out the very best silicone hose manufacturers and are proud to offer our own brand of STM silicone couplers. We would not put our name on these if they were nothing less than the best.
Click image for all applications.
|
|
|
|
BUSCHUR INTERCOOLER
The Buschur Racing FMIC upgrade core measures at 12" x 4.5" x 18" which is the largest core offered by any company for the Evo X. When dyno tested, it has shown a gain 21.3hp and 19ft tq. while keeping intake temps down to a minimum on the Buschur Racing Project X.
The kit will include all couplings, clamps and hardware needed for installation.
Price: $770.00
|
|
|
|
BUSCHUR UPPER IC PIPE
The Buschur Racing 2008 Mitsubishi Evolution X upper intercooler pipe is made from 2.5" mandrel bent stainless steel and includes couplings and clamps.
You will see a decent gain in HP and Torque, and also, notice increased throttle response.
|
|
|
|
BUSCHUR LOWER IC PIPE
The tubing (available brushed or polished) is mandrel bent 304 grade Stainless Steel, a little shorter and much smoother than the stock one. Also, you're able to relocate the BOV return hose using the stock hose to make it all look a LOT better under the hood. This will work with the factory FMIC and will work with the Buschur X FMIC as well!
|
|
|
|
BUSCHUR LOWER IC PIPE (EVO X MR)
The buschur MR pipe is a little shorter and much smoother than the stock one. This will allow you to relocate the BOV return hose using the stock hose to make it all look a LOT better under the hood. The tubing is mandrel bent 304 grade SS. The lower i/c pipe (and the Buschur upper i/c pipe) both work with the factory FMIC and the Buschur FMIC, but WILL NOT work with the stock airbox.
|
|
|
|
AMS INTERCOOLER
This is a direct bolt-on utilizing your stock piping and mounting points with purpose built end tanks for the EVO X. With over 80% more internal flow area than its stock counterpart, AMS's stock EVO X gained 10 Wheel horsepower over the stock core just by bolting it on, without even re-tuning the ECU! Click for more info.
|
|
|
|
AMS UPPER IC PIPE
Direct replacement for your factory upper intercooler pipe. Available with a black powdercoat finish or polished aluminum. By simply installing this Upper Intercooler Pipe you can expect to see 5 awhp peak and 10+ awhp gains in the midrange over stock without even re-tuning the ECU!
|
|
|
|
AMS LOWER IC PIPE (EVO X)
This is a direct replacement for your factory lower intercooler pipe. Made from lightweight 2.5" mandrel bent aluminum tubing with bead rolled pipe ends then mounted to the core support (in the factory location) to help prevent couplers from popping off under boost. And it is all beautifully tig-welded at AMS in Chicago.
|
|
|
|
STAINLESS STEEL T-BOLT CLAMPS
Stainless Steel T-Bolt band clamps with fully plated carbon steel bolts to keep your couplers super tight and your engine bay looking clean.
|
|
|
|
|
SILICONE COUPLERS, REDUCERS & BENDS
Highest grade silicone, hand wrapped and will probably outlast us and our cars! The straight and reducing couplers are 3" long. Numbers below represent the I.D. (Inside Diameter) of the coupler.
Click for all applications.
|
|
|
|
BUSCHUR RACING MISCELLANEOUS CORE
This core has the end tanks already in place for those of you looking for a DIY project or custom set-up's. It measures in at 24" x 3.5" x 10.5"
Price: $509.00
|
|
|
More Parts Coming Soon
Please bear with us as we prepare and update the inventory for our new website. If you don't see what you're looking for, give us a call or email and we can get it for you at a great price!
|
|
|
|
| | | | | | | | | | | | | |