|
||
|
|
|
UNIVERSAL - WELD BUNGS & CAPS
///
BACK TO TOP |
|
|
STM UNIVERSAL ALUMINUM WELD-ON 2" BUNG & CAP
The STM Aluminum Weld-On 2" Bung & Cap are the perfect match for those DIY fabrication reservoir and overflow projects. The cap is anodized with a black finish and includes the o-ring seal.
Universal Application.
STM-RES-CAPB-2IN |
|
|
UNIVERSAL - RADIATOR FABRICATION
///
BACK TO TOP |
|
|
TRS ALUMINUM RADIATOR STANDOFF
The Race Spot's Aluminum Radiator Standoff is used for fabrication purposes when welding up a custom radiator. The 5/16" nub can be used for the radiator bracket support. These are available with a 1/8" (short) or 9/16" (tall) base.
Universal Application.
TRS-RADP-S,TRS-RADP-T |
|
VIBRANT WELD-ON ALUMINUM RADIATOR FILLER NECKS
Vibrant Performance Weld-On Aluminum Radiator Filler Necks.
32mm ID (1.25")
42mm ID (1.65")
Universal Application.
20980,20982 |
|
VIBRANT BLACK ALUMINUM RADIATOR FILLER CAPS
Vibrant Performance black anodized aluminum radiator caps for 32mm and 42mm Vibrant Filler Necks above.
Universal Application.
20981,20983 |
|
|
FABRICATION - O2 BUNGS, PLUGS & SPACERS
///
BACK TO TOP |
|
|
STM WELD-IN ALUMINUM O2 BUNG
The STM Aluminum O2 Sensor Bung allows you to add bungs to your custom aluminum exhaust parts. The bungs are extra thick to reduce the chance of warping when welding. Steel plug is also included. M18 x 1.5 Thread. Accepts all standard O2 sensors.
Universal Application.
STM-AL-BNG |
|
VIBRANT PERFORMANCE WELD-IN STAINLESS O2 BUNG & PLUG
Standard Oxygen Sensor Bung made of T304 Stainless Steel. Mild Steel Zinc Plated Plug. M18 x 1.5 Thread. Accepts all standard O2 sensors.
Universal Application.
|
|
VIBRANT PERFORMANCE 45° ANGLED WELD-IN O2 BUNG
Angled design allows for easier installation of an O2 Sensor on applications where there is limited clearance. Bung made of T304 Stainless Steel. Mild Steel Zinc Plated Plug. M18 x 1.5 Thread. Accepts all standard O2 sensors.
Universal Application.
1193,1195 |
|
VIBRANT J-STYLE OXYGEN SENSOR WELD ON BUNG
The Vibrant Performance "J" Style Oxygen Sensor Weld On Bung is a very effective tool for avoiding Check Engine Lights. The "J" shape allows the O2 sensor to be installed parallel to the exhaust pipe for better clearance and pulls the Oxygen Sensor further away from the exhaust gas stream.
Universal Application.
1192 |
|
VIBRANT J-STYLE THREAD-ON OXYGEN SENSOR FITTING
The Vibrant Performance "J" Style Oxygen Sensor Fitting threads into existing M18 x 1.5 O2 Bungs to help eliminate Check Engine Lights. The "J" shape allows the O2 sensor to be installed parallel to the exhaust pipe for better clearance and pulls the Oxygen Sensor further away from the exhaust gas stream.
Universal Application.
11620 |
|
VIBRANT J-STYLE THREAD-ON ADJUSTABLE O2 SENSOR FITTING
J-Style Oxygen Sensor Restrictor Fitting with Adjustable Gas Flow Inserts. This J-Style Restrictor Fitting works just like Vibrant's original design but allows for easier installation when clearance under the vehicle is an issue. T304 Stainless Steel.
Universal Application.
11619 |
|
VIBRANT O2 SENSOR FITTING WITH ADJUSTABLE JETS
Oxygen Sensor Simulator Fitting with Adjustable Jets. T304 stainless steel with brass washer. Use one of the three "jets" to help fool the O2 Sensor and eliminate Check Engine Lights.
Universal Application.
11621 |
|
REAR O2 SENSOR CHECK ENGINE FIX
Just screw your rear o2 sensor into this, spacing the sensor further from the exhaust flow to trick the sensor and eliminate check engine lights while you race.
Universal Application.
STM-42002 |
|
VIBRANT PERFORMANCE OXYGEN SENSOR SOCKET TOOL
This cut-away socket tool is designed to clear the O2 Sensor Wire and simplify removal or installation of O2 sensors. This sturdy tool is manufactured to withstand the installation torque requirements. Features a 3/8" drive receiver.
Universal Application.
11148 |
|
|
FABRICATION - EGT BUNGS & FITTINGS
///
BACK TO TOP |
|
|
VIBRANT PERFORMANCE STAINLESS STEEL WELD-IN EGT BUNG
Weld in this bung if you want to insert an EGT (Exhaust Gas Temperature) Sensor into a manifold or downpipe. 1/8" NPT, 27 Threads per inch. Vibrant Performance.
Universal Application.
1197 |
|
VIBRANT PERFORMANCE 1/8" EGT BUNG PLUG
Vibrant Performance EGT Sensor Bung Threaded Plug. 1/8" NPT. Zinc Plated Mild Steel.
Universal Application.
11147 |
|
|
FABRICATION - NPT BUNGS
///
BACK TO TOP |
|
|
STM ALUMINUM NPT WELD-ON BUNGS
STM Aluminum NPT Weld-On Bungs are available in the most popular sizes 1/8", 1/4", & 3/8" and 100% made in the USA!
Universal Application.
STM-FAB-ALFB |
|
VIBRANT ALUMINUM NPT WELD-ON BUNGS
Vibrant Weld Bungs are ideal for use with Aluminum Radiators, Oil Pans, custom tank fabrication or any other project that requires custom plumbing. Available in 1/8", 1/4", 3/8", 1/2", 3/4" and 1" sizes.
Universal Application.
11170,11171,11172,11173,11174,11175 |
|
VIBRANT MILD STEEL NPT WELD-ON BUNGS
Vibrant Mild Steel Weld Bungs are ideal for use with any fabrication or project that requires custom plumbing. Available in 1/8", 1/4", 3/8", 1/2" and 3/4" sizes.
Universal Application.
11270,11271,11272,11273,11274 |
|
|
FABRICATION - -AN BUNGS
///
BACK TO TOP |
|
|
STM ALUMINUM MALE -AN WELD BUNGS
The STM Aluminum Male AN Weld Bungs are available in three sizes (-6AN, -8AN and -10AN). Sold individually.
Universal Application.
STM-6ANMB-AL,STM-8ANMB-AL,STM-10ANMB-AL |
|
VIBRANT PERFORMANCE ALUMINUM MALE -AN WELD BUNGS
Vibrant Performance Aluminum Male -AN Weld Bungs are available in sizes 4AN, 6AN, 8AN, 10AN, 12AN, 16AN and 20AN
Universal Application.
11150,11151,11152,11153,11154,11155,11156 |
|
VIBRANT PERFORMANCE STEEL MALE -AN WELD BUNGS
Vibrant Performance Steel Male -AN Weld Bungs are available in sizes 4AN, 6AN, 8AN, 10AN, 12AN, 16AN and 20AN
Universal Application.
11250,11251,11252,11253,11254,11255,11256 |
|
|
|
