|
EVOLUTION VIII-IX - GASKETS
///
BACK TO TOP |
|
|
TURBO XS DONUT GASKET
Turbo XS "Donut" Gasket for Evo VIII-IX.
2003-2006 Evolution VIII & IX.
GSI-TRM |
|
OEM MITSUBISHI DOWNPIPE O2 DONUT GASKET
If you're switching downpipes, you're going to want this donut gasket. Brand new OEM Mitsubishi gasket works with the stock downpipe or any aftermarket pipe that uses a donut gasket.
2003-2006 Evolution VIII & IX.
MR450703 |
|
REMFLEX 2-BOLT EXHAUST GASKETS
Remflex exhaust gaskets come in a standard 1/8" thickness and are designed to crush 50% allowing them to fill gaps in the flange surface up to 1/16". 100% flexible graphite construction means Remflex gaskets are good for up to 3,000°F, far exceeding that of any vehicle's exhaust system temperature.
Universal Application.
8055,8006,8070 |
|
VIBRANT PERFORMANCE 2-BOLT EXHAUST GASKETS
Vibrant Performance 2-bolt, high temperature exhaust gaskets are made of Flexible Graphite and available in 2, 2.25, 2.5 and 3 inch (I.D.) applications.
Universal Application.
1455,1456,1457,1458,1459 |
|
VIBRANT PERFORMANCE 3-BOLT EXHAUST GASKETS
Vibrant Performance 2-bolt, high temperature exhaust gaskets are made of Flexible Graphite and available in 2.25, 2.5, 2.75 and 3 inch (I.D.) applications.
Universal Application.
1461,1462,1466,1463,1464 |
|
OEM MITSUBISHI 4-PIECE COPPER EXHAUST MANIFOLD GASKET
Genuine OEM Mitsubishi 4-piece Copper Exhaust Manifold Gasket.
2003-2006 Evolution VIII & IX.
MR323654 |
|
STM EVO 8/9 STAINLESS TURBO TO MANIFOLD GASKET
The STM Stainless Turbo to Manifold Gasket is a factory-replacement gasket for all Evolution VIII and IX models. This gasket is the same thickness of the OEM gasket, so it will not change the placement of your turbo.
2003-2006 Evolution VIII-IX.
STM-EVO89-SSG-TM |
|
OEM MITSUBISHI TURBO TO MANIFOLD GASKET
OEM Mitsubishi Turbo to Manifold Gasket.
2003-2006 Evolution VIII & IX.
1515A184 |
|
STM EVO 8/9 STAINLESS STEEL DIVIDED TURBO OUTLET GASKET
The STM Divided Turbo Outlet Gasket fits all Evolution VIII-IX models and features a 20 gauge thickness, cut from T304 Stainless Steel and made in the USA! This gasket goes between your turbo and o2 housing.
2003-2006 Evolution VIII & IX.
STM-EVO89-SSG-DTO |
|
OEM MITSUBISHI TURBO TO O2 HOUSING GASKET
OEM Mitsubishi Turbo to o2 Housing Gasket.
2003-2006 Evolution VIII & IX.
MR299686 |
|
|
EVOLUTION VIII-IX - HANGERS
///
BACK TO TOP |
|
|
TORQUE SOLUTION EVO 8/9 EXHAUST MOUNT KIT
Torque Solution exhaust mounts are made from a high grade Urethane and are a direct replacement for your existing mounts. These exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits.
2003-2006 Evolution VIII & IX.
TS-EH-004 |
|
OEM MITSUBISHI EXHAUST HANGER & BOLTS
OEM Mitsubishi Rear Exhaust Hanger and bolts. This bolts to the rear subframe.
2003-2006 Evolution VIII & IX.
MR597094,MR993670,MF243661 |
|
OEM MITSUBISHI DOWNPIPE EXHAUST HANGER
OEM Mitsubishi Downpipe Exhaust Hanger.
2003-2006 Evolution VIII & IX.
MR431634 |
|
OEM MITSUBISHI EXHAUST HANGER BOLT SPACER
Genuine OEM Mitsubishi Exhaust Hanger Bolt Spacer.
2003-2006 Evolution VIII & IX.
MR597094 |
|
|
EVOLUTION VIII-IX - HARDWARE
///
BACK TO TOP |
|
|
ARP STAINLESS EXHAUST MANIFOLD STUD SET
ARP has developed an innovative multi-purpose accessory stud manufactured from a proprietary alloy developed by ARP (Stainless 300) and are impervious to the rust and corrosion that plagues ordinary fasteners. The studs come with "easy wrenching" 12-point nuts, which work great in the tightest of quarters.
2003-2006 Evolution VIII & IX.
SS7B |
|
EXHAUST MANIFOLD STUDS, NUTS & WASHERS
STM has assembled this kit comprosed of brand new OEM Mitsubishi exhaust manifold studs, nuts and washers. Buy them as the full kit or separately as needed.
Evolution VIII & IX.
[OEM-2GEVO-EXSTNT]
MD041192(x7),MR212302(x7),MD005317(x7),MD050076(x2),MR224500(x2),MD146938(x2)
|
|
STM TURBO TO EXHAUST MANIFOLD BOLT KIT
The STM Turbo to Exhaust Manifold Bolt Kit is comprised of stainless steel ARP bolts to fasten your turbo to factory or stock-style exhaust manifold.
2003-2006 Evolution VIII & IX.
STM-EVO-ARPMTBK |
|
OEM MITSUBISHI O2 HOUSING BOLT
OEM Mitsubishi O2 Housing Bolt.
2003-2006 Evolution VIII & IX.
MD062961 |
|
OEM MITSUBISHI TURBO TO MANIFOLD BOLT
Genuine OEM Mitsubishi Turbo to Exhaust Manifold Bolt.
2003-2006 Evolution VIII & IX.
MN119783 |
|
OEM MITSUBISHI TURBO TO O2 HOUSING STUD
Genuine OEM Mitsubishi Turbo to O2 Housing Stud fits 2003-2015 Evolution 8/9/X models.
2003-2006 Evolution VIII & IX.
MR224441 |
|
OEM MITSUBISHI TURBO & MANIFOLD WASHERS
OEM Evo VIII-IX Washers for o2 Housing Bolts & Turbo Bolts.
2003-2006 Evolution VIII & IX.
MD132933 |
|
OEM MITSUBISHI TURBO TO MANIFOLD NUT
Genuine OEM Mitsubishi Turbo to Manifold Nuts. Please note, these are expensive and the price is for ONE nut.
2003-2006 Evolution VIII & IX.
MD132930 |
|
OEM MITSUBISHI O2 HOUSING NUTS
Genuine OEM Mitsubishi O2 Housing Nut fits all the Evolution VIII & IX models and 1990-1999 DSM. Sold individually. Mitsubishi possibly forged these from a meteorite for that price.
2003-2006 Evolution VIII & IX.
MD050073 |
|
OEM MITSUBISHI TURBO TO MANIFOLD STUD
Genuine OEM Mitsubishi Turbo to Manifold Stud for Evo 8/9 and Evo X. Please note, these are rather expensive and the price is for ONE stud.
2003-2006 Evolution VIII & IX.
MN119784 |
|
OEM MITSUBISHI O2 HOUSING TO DOWNPIPE SPRING & BOLT
OEM Mitsubishi o2 Housing to Downpipe Spring & Bolt.
2003-2006 Evolution VIII & IX.
MR597273, MR597271 |
|
|
EVOLUTION VIII-IX - HEAT SHIELDS & BUMPER GUARDS
///
BACK TO TOP |
|
|
BUSCHUR RACING EXHAUST MANIFOLD HEATSHIELD
Buschur's new exhaust manifold cover fits over the stock Evo VIII-IX manifold or the Buschur Racing cast manifold. Polished to a mirror finish, this is a sweet piece to dres up your engine bay!
2003-2006 Evolution VIII & IX.
BUSCHUR,EVO,HEATSHIELD |
|
TOMEI EXPREME STAINLESS HEATSHIELD
The Tomei Expreme Heat Shield is made from high grade aircraft quality stainless steel SUS304. Designed for the stock manifold to keep the exhaust temps contained and keeps your bay looking fresh.
2003-2006 Evolution VIII & IX.
191247 |
|
MAP BRUSHED STAINLESS HEATSHIELD
Enhance the look of your engine bay with the MAP brushed stainless steel heat shield. Please note this will not work with aftermarket manifolds that are not provisioned for the factory heat shield.
2003-2006 Evolution VIII & IX.
MAP EVO-EMHS |
|
FORGE EXHAUST MANIFOLD HEATSHIELD
The Forge Motorsport Turbo Heatshield is a piece of art. Beauty with functionality.
2003-2006 Evolution VIII & IX.
2001-2002 JDM Evolution VI & VII.
FMEVOHS2,FMEVOHS1 |
|
VOLTEX CARBON FIBER EXHAUST SHIELD (JDM IX REAR)
Protect your JDM Evo IX rear bumper from exhaust damage and add a touch of style with the Voltex Carbon Fiber Exhaust Shield.
2003-2006 Evolution VIII & IX (with JDM Rear).
VL-ER-2 |
|
APR CARBON FIBER HEAT SHIELD (USDM REAR BUMPER)
APR Performance Carbon Fiber Heat Shield for USDM Rear Bumper. Dress-up your car with carbon fiber, molded to precise dimensions that only pre-preg. materials can achieve. These parts are exotic-looking, race-inspired, and are unmatched in quality.
2003-2006 Evolution VIII & IX (with USDM Rear).
CBX-EVOSHIELD |
|
|
EVOLUTION VIII-IX - OXYGEN SENSORS
///
BACK TO TOP |
|
|
OEM MITSUBISHI OXYGEN SENSORS
Genuine OEM Mitsubishi Oxygen sensors. Front and rear O2 sensors available for all VIII-IX model years.
2003-2006 Evolution VIII-IX.
MN153010,1588A064,MR578532,MN191125,1588A119 |
|
AEM REPLACEMENT 4.9LSU BOSCH OXYGEN SENSOR
AEM Replacement 4.9LSU Bosch Oxygen Sensor for new AEM Digital Wideband UEGO Air/Fuel Gauge 30-4110.
Universal Application.
30-2004 |
|
AEM REPLACEMENT 4.2LSU BOSCH OXYGEN SENSOR
AEM Replacement 4.2LSU Bosch Oxygen Sensor for original AEM Wideband UEGO Air/Fuel Gauges.
Universal Application.
30-2001 |
|
AUTOMETER NARROW BAND O2 SENSOR KIT
Auto Meter Narrow Band O2 Sensor Kit for use with narrow band air/fuel ratio gauges.
Universal Application.
2244 |
|
INNOVATE REPLACEMENT 02 SENSOR (LSU 4.2)
Bosch LSU 4.2 5-Wire Wide-Band O2 Sensor. Compatible with Innovate Motorsports LM-1, LM-2, LC-1, and LC-1ST.
Universal Application.
3737 |
|
INNOVATE REPLACEMENT 02 SENSOR (LSU 4.9)
Bosch LSU 4.9 5-Wire Wide-Band O2 Sensor. Compatible with Innovate Motorsports LM-2, LC-2, and MTX-L, SCG-1, DLG-1, PSB-1, and PSN-1.
Universal Application.
17025,3888 |
|
NGK NTK REPLACEMENT O2 SENSOR
NGK / NTK replacement oxygen sensor sensor for the AFX wideband monitor.
Universal Application.
24302 |
|
|
UNIVERSAL - TURBO BLANKETS & WRAP
///
BACK TO TOP |
|
|
DEI DEI TITANIUM TURBO SHIELDS
Custom fit T25/T28, T3, T4 or T6 Titanium Turbo Shields with LR Technology provide the ultimate means of reducing turbo lag while serving as a superior heat barrier - shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
T25/T28, T3, T4 and T6 Turbos.
010140,010141,010144,010145,010146,010147,010148,010149 |
|
PROSPORT FIBERGLASS HEADER WRAP
Durable, tight woven, 100% Fiberglass, thermo heat wrap is easy to install. One roll will wrap one medium-sized header. This material was hand picked for its heat characteristics and most importantly the flexibility, making wrapping headers much easier. 2" 50' roll.
Universal Application.
HEA-WRAP-KIT-BLK |
|
DEI EXHAUST WRAP
DEI's hi-temp fiberglass composite material is designed to keep heat in the exhaust and evacuate it out of the engine compartment. Wrapping your headers will reduce underhood temperatures by up to 50% while providing additional horsepower and engine protection. From 1" x 15' to 2" x 100'.
Universal Application.
010120,010107,010118,010121,010108,010116
010105,010101,010117,010106,010102,010103 |
|
DEI TITANIUM EXHAUST WRAP
Titanium exhaust wrap, with LR Technology, is made from pulverized lava rock and stranded into a fiber material and is engineered to be stronger than typical wraps on the market today. It has the ability to handle higher heat for improved performance and durability - and with a cool carbon fiber look! From 1" x 15' to 2" x 100'.
Universal Application.
010128,010126,010133,010129,010131,010132,010127,010130 |
|
DEI LOCKING TIES
Keep your exhaust wrap in its place. DEI's fireproof stainless steel locking ties have a melting temperature of 2,500° F. They are rust resistant and non-magnetic. 8" or 14" ties.
Universal Application.
010201,010202 |
|
DEI HIGH-TEMP SILICONE COATING
Provides lasting protection for any hot surface up to 1500 degrees. DEI recommend the use of this black coating with their exhaust wrap because it seals the material and provides lasting protection from oil, dirt and road grime.
Universal Application. (Shipping to Lower 48 US Only)
010301 |
|
|
UNIVERSAL - SHROUDS & REFLECTIVE TAPE
///
BACK TO TOP |
|
|
DEI REFLECT-A-GOLD | ADHESIVE SHEETS
This state-of-the-art polymer is extremely light weight and capable of handling continual operating temperatures up to 850°F. Highly effective material for firewalls, fuel cells, engine covers, etc. and can reflect up to 80% of radiant heat. Available in a variety of sizes.
Universal Application.
010391,010392,010393,010394,010395,010396,010397 |
|
DEI HEAT & SOUND INSULATION
Floor and Tunnel Shield Heat & Sound Insulation was designed to withstand direct temperatures up to 1750°F, providing the optimal way to reflect noise and heat away from vehicle components and perfect for protecting under hoods, firewalls, fuel cells, exterior areas such as transmission tunnel, floorpans and other under-vehicle locations. Available in a variety of sizes.
Universal Application.
050501,050502,050503 |
|
DEI HEAT SCREEN
Excellent way to reflect radiant heat away from a vehicle's interior and because of its flexibility, this 36"x40" roll can be trimmed to size to protect against excessive heat sources. Features a thermal barrier on one side made of a superior reflective aluminized mylar surface capable of withstanding direct heat up to 1200°F.
Universal Application.
010401 |
|
DEI REFLECT-A-COOL | SELF ADHESIVE SHEETS
Constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F and 2000°F of radiant heat. Reflect-A-Cool can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Available in a variety of sizes.
Universal Application.
010460,010461,010462,010412 |
|
DEI COOL TAPE
Cool-Tape offers a flexible, easy to apply and ultra light weight solution to reflect heat and ideal for wrapping wiring, cables, hoses, fuel lines and covering seams. Made of one mil aluminized material bonded to woven fiberglass, Cool-Tape has a super strong self-adhesive backing capable of protecting up to 2000°F radiant heat. Available in a variety of sizes.
Universal Application.
010408,010416,010413 |
|
DEI WIRE/HOSE HEAT SHROUD
Made from hi-temp fiberglass fabric bonded to an aluminized material with the added convenience of a hook & loop closure design. Simply wrap Heat Shroud around wires, cables or hoses without the need of removing one end. Protects against oil, dirt and road grime and can be shaped to fit the tightest bends and offers the versatility of fitting diameters from 1/2" to 1 1/4".
Universal Application.
010405 |
|
DEI HEAT SHEATH ALUMINIZED SLEEVING
Designed to slide over wires, cables and hoses providing the ultimate protection from oil, dirt and road grime. Heat Sheath is very easy to work with and pliable enough to be shaped to fit the tightest bends. Heat Sheath is fireproof and will withstand 500°F direct continuous/2000°F radiant heat.
Universal Application.
010418,010403,010419,010404,010420 |
|
DEI FIRE SLEEVE & TAPE KIT
Ideal for protecting against intense underhood heat making it the perfect solution for insulating hoses, wiring, oil and fuel lines and more. Constructed of a woven insulated glass fiber braided sleeve heavily coated with 100% iron oxide silicone rubber, Fire Sleeve is capable of insulating and withstanding direct continuous temperatures up to 500°F. Includes a 16" length of Fire Tape.
Universal Application.
010470,010472,010474 |
|
DEI FIRE WRAP 3000
Made from woven insulated glass fiber braided sleeve heavily coated with 100% iron oxide silicone rubber as Fire Sleeve with the same features, benefits and advantages but with the added convenience of a hook & loop closure design. Simply wrap around wires, cables or hoses without the need of removing them.
Universal Application.
010477,010478,010479 |
|
DEI FIRE TAPE
Fire Tape is a non-adhesive silicone rubber tape that is self-bonding, self-curing and forms a permanent water-tight barrier that withstands 475°F direct continuous heat. Each roll is 1" wide x 36' length and includes a guide line for easy application.
Universal Application.
010476 |
|
|
EVOLUTION VIII-IX - FABRICATION
///
BACK TO TOP |
|
|
SLS EXHAUST MANIFOLD FLANGE (MITSUBISHI 4G63)
Straight line Specialties head flanges are made of CNC machined steel with 3D taper port (1.5" or 1.25" Sch 10) and features machined cutbacks on gasket side to reduce warpage during welding and promote gasket seal.
2003-2006 Evolution VIII & IX.
SLS 4G63 MANIFOLD |
|
VIBRANT EXHAUST MANIFOLD FLANGE (MITSUBISHI 4G63)
Vibrant Performance Exhaust Manifold Head Flange. T304 Stainless Steel.
2003-2006 Evolution VIII & IX.
1460M |
|
SLS O2 HOUSING INLET FLANGE
Straight Line Specialties O2 Housing Inlet Flange. CNC machined 1/2" steel. 3D taper wastegate port. 2.25" wastegate outlet, 2.5" turbine outlet. Fits Mitsubishi Evo VIII-IX turbine housings.
2003-2006 Evolution VIII & IX.
SLS EVO O2 |
|
TURBO INLET FLANGE
Vibrant Performance Evo VIII-IX 4G63 and Evo X 4B11 Turbo Inlet Flange.
1/2" thick, mild steel.
2003-2006 Evolution VIII & IX.
14020 |
|
MITSUBISHI PARTS
Take a look here to see even more OEM parts. STM has a MASSIVE stock of Mitsubishi parts on hand from tiny clips and gaskets to must-have JDM rears. If you can't find what you need, just give us a shout, if Mitsubishi still makes it, we can get it for you!
2003-2006 Mitsubishi Lancer Evolution VIII-IX.
MITSUBISHI |
|
