|
EVOLUTION X - FUEL PACKAGES & KITS
///
BACK TO TOP |
|
|
AMS FUEL PRESSURE REGULATOR KIT
Designed for anyone running an upgraded fuel pump and/or fuel injectors. Whether you are running too rich and need to back off the fuel pressure or if you are running too lean on your current injectors and need to raise base fuel pressure, this is the system for you! A vibration resistant, liquid filled fuel pressure gauge is included allowing you to monitor your fuel pressure. Requires no cutting or modifications to your vehicle for easy installation and/or removal.
Evolution X.
AMS,FPR |
|
HKS COMPLETE FUEL UPGRADE KIT
The HKS Evo X Complete Fuel Upgrade Kit is good for setups up to 500HP. Includes 800cc injectors, high flow fuel pump, purple HKS fuel rail, and fittings. Direct bolt-on replacement of the factory fuel rail, and allows for larger top-feed injectors to be added. HKS Fuel Rails are machined out of aluminum and anodized HKS' signature purple for durability and visual appeal.
Evolution X.
14007-AM006 |
|
|
EVOLUTION X - FUEL PRESSURE REGULATOR
///
BACK TO TOP |
|
|
WELDON RACING -10AN/-8AN BYPASS FPR (FLUOROSILICONE)
The A2040 Weldon Racing Bypass Fuel Pressure Regulators have a with Fluorosilicone Diaphragm and are for use with fuel-injected applications running non-oxygenated fuels and available in two options: 30 to 110 psi base pressure or 90 to 200 psi base pressure. Fuel pressure increases on a 1:1 ratio with boost and features two -10AN pressure ports and one -8AN return port.
Universal Application.
A2040-281-A-120,A2040-281-A-200 |
|
WELDON RACING -10AN/-8AN BYPASS FPR (TEFLON)
The T2040 Weldon Racing Bypass Fuel Pressure Regulators with the upgraded Teflon Diaphragm are compatible with all fuels and for use with fuel-injected applications. Available in two options: 30 to 110 psi base pressure or 90 to 200 psi base pressure. Fuel pressure increases on a 1:1 ratio with boost and features two -10AN pressure ports and one -8AN return port.
Universal Application.
T2040-120,T2040-200 |
|
WELDON RACING -12AN BYPASS FPR (TEFLON)
The A2047 Weldon Racing Bypass Fuel Pressure Regulator with the upgraded Teflon Diaphragm is compatible with all known racing fuels and and is capable of flowing well over 10 GPM! Recommended for use with fuel-injected applications running 30 to 110 psi base pressure. Fuel pressure increases on a 1:1 ratio with boost and this FPR features three -12AN pressure ports.
Universal Application.
A2047-438-T-120 |
|
AEROMOTIVE PERFORMANCE EFI RED FPR
Aeromotive A1000-6 regulator is designed for medium to high horsepower applications. Features Aeromotive's high-flow design, superb pressure control and legendary durability. On the street and at the track, this pressure regulator has logged more miles, laps and passes than any other performance EFI regulator in the world!
Universal Application for -6AN Fittings.
13109 |
|
AEROMOTIVE PERFORMANCE EFI BLACK FPR
Aeromotive A1000 regulator is designed for medium to high horsepower applications. Features Aeromotive's high-flow design, superb pressure control and legendary durability. On the street and at the track, this pressure regulator has logged more miles, laps and passes than any other performance EFI regulator in the world!
Universal Application for -6AN Fittings.
13131 |
|
AEROMOTIVE EFI REGULATOR SERVICE KIT
The Aeromotive EFI Fuel Pressure Regulator Service Kit includes a new diaphragm to get your fuel pressure back to consistent levels. They are available for all Aeromotive fuel pressure regulators and install easily with no modifications.
Universal Application.
13001 |
|
FUELAB MINI FUEL PRESSURE REGULATORS
FUELAB Mini 535 Series 1:1 Fuel Pressure Regulators have all the same great features as our 515 series, only smaller and weigh 50% less. They accept port style and non-port style union fittings without interference. The 535 Series Fuel Pressure Regulator has a -6AN return port located on the bottom.
Universal Application.
53501 |
|
FUELAB STANDARD FUEL PRESSURE REGULATORS
FUELAB 515 Series Fuel Pressure Regulators are designed with performance and flexibility in mind. They accept port style and non-port style union fittings without interference. Available in 6 colors with -10AN or -6AN inlets, supporting fuel injected applications up to 90 PSI. Both the 515 Series Fuel Pressure Regulator have a -6AN return port located on the bottom.
Universal Application.
51501,51502 |
|
FUELAB REPLACEMENT HARDWARE KIT FOR "MINI" FPR
The FUELAB Replacement Hardware Kit for 535/545 Series "Mini" Fuel Pressure Regulators includes everything as pictured with stainless and brass hardware and O-ring seals
FUELAB 535/545 Series "Mini" FPR.
14503 |
|
FUELAB REPLACEMENT HARDWARE KIT FOR "STANDARD" FPR
The FUELAB Replacement Hardware Kit for 51502/51504/51506 "Standard" Fuel Pressure Regulators includes everything as pictured with stainless and brass hardware and O-ring seals.
FUELAB 51502/51504/51506 "Standard" FPR.
14502 |
|
FUELAB ELECTRONIC FUEL PRESSURE REGULATORS
The new FUELAB Electronic Fuel Pressure Regulator works directly with the Prodigy line of fuel pumps to reduce heat build up and vapor lock conditions related to street/strip operation. Set the pressure mechanically like a traditional bypass regulator, the let the electronic regulator's demand based speed control take care of the rest!
Universal Application.
52901,52902 |
|
FUELAB HIGH FLOW FUEL PRESSURE REGULATORS
Utilizing a massive 1/2" return orifice and -10AN ports, these regulators hold no bounds. With the bypass capability over 5 GPM at 5 PSI, this new regulator can handle blow through carbureted applications well over 1800 H.P., and for EFI applications using belt driven fuel pumps; even further (with a flattened regulation slope).
Universal Application.
56501,56504 |
|
STM 100 PSI FUEL PRESSURE GAUGE
The STM Fuel Pressure Gauges are silicone-filled for vibration dampening and sealed in a rugged, stainless steel case. Accurately reads fuel pressure from 0-100 psi and features 1/8" NPT center back connection to fit most regulators.
Universal Application.
STM-00100-GAUGE |
|
MARSHALL 0-100 PSI FUEL PSI GAUGE
Marshall shock-proof gauges have rugged construction and are liquid filled for vibration dampening.
Universal Application.
MS00100 |
|
|
EVOLUTION X - FUEL FITTINGS
///
BACK TO TOP |
|
|
STM -6AN BLACK ANODIZED E85 SAFE FUEL BULKHEAD FITTING
The STM -6AN Fuel Bulkhead Fitting is designed to attach to your fuel pump hanger by drilling out the old feed line. This is perfect for multiple-pump applications and features a 5/16 barb on one end and a -8AN on top. Simply sandwich your hanger between the fitting and washer/nut. The STM Bulkhead is anodized black to protect against corrosive fuels and is E85 safe.
Universal Application.
STM-BULKHEAD-6 |
|
TRS -8AN FUEL BULKHEAD FITTING
The Race Spot -8AN Fuel Bulkhead Fitting is designed to attach to your fuel pump hanger by drilling out the old feed line. This is perfect for multiple-pump applications and features a 5/16 barb on one end and a -8AN on top. Simply sandwich your hanger between the fitting and washer/nut. The TRS Bulkhead is anodized black to protect against corrosive fuels and is E85 safe.
Universal Application.
TRS-BULK-8 |
|
TRS FUEL DISTRIBUTION Y-BLOCK (3-PORT)
The Race Spot's Billet Aluminum 3-Port Y-Block is perfect for triple-pump setup's. It's fully anodized to protect against corrosive fuels and features a -10AN ORB port and three -8AN ports making it easy for you to switch to different sizes using ORB to Flare fittings. Two mounting holes and the low profile design make for an easy, custom mount.
Universal Application.
TRS-3Y |
|
TRS FUEL DISTRIBUTION Y-BLOCK (2-PORT)
The Race Spot's Billet Aluminum 2-Port Y-Block is fully anodized to protect against corrosive fuels and features a -10AN ORB port and two -8AN ports making it easy for you to switch to different sizes using ORB to Flare fittings. Two mounting holes and the low profile design make for an easy, custom mount.
Universal Application.
TRS-2Y |
|
|
EVOLUTION X - FUEL RAILS
///
BACK TO TOP |
|
|
AGENCY POWER EVO X FUEL RAIL KIT
Direct replacement for the factory unit,CNC machined out of 6061 aluminum, then anodized in Agency Power Red. It fits with the stock fuel pressure regulator and fittings. The fuel rail can also be set up to work with larger AN lines and aftermarket kits as well, with a simple unscrew of a piece.
Evolution X.
AP-CZ4A-124 |
|
COSWORTH HIGH VOLUME FUEL RAIL KIT
The Cosworth High Volume Fuel Kit features a hard anodized fuel rail machined from solid aluminum with o-ringed fittings and a pre-shaped inlet pipe. The Cosworth High Volume Fuel Rail Kit can be used with original or various aftermarket injectors and FPR's.
Evolution X.
20005241 |
|
HKS PURPLE FUEL RAIL
This is a direct bolt-on replacement of your factory fuel rail, and allows for larger injectors to be added. HKS Fuel Rails are machined out of aluminum and anodized HKS signature purple for durability and visual appeal.
Evolution X.
14007-AM005 |
|
STM EVO X STAINLESS INTAKE MANIFOLD BOLT KIT
The STM Evo X Stainless Intake Manifold Bolt Kit replaces all your worn, factory bolts on the manifold, fuel rail and MAP sensor giving you a clean, rust-free presentation!
2008-2015 Evolution X.
STM-EVOX-SBK-IM |
|
|
EVOLUTION X - FUEL FILTERS
///
BACK TO TOP |
|
|
WELDON FUEL FILTER WITH 10 MICRON SS FILTER (AFTER-PUMP)
The Weldon Billet Fuel Filters with 10 micron stainless steel elements are designed to be placed in line AFTER the fuel pump. These filters are available with -8AN or -10AN inlet and outlet ports.
Universal Application.
WEQ1010SSN,WEQ0810SSN |
|
WELDON FUEL FILTER WITH 100 MICRON SS FILTER (PRE-PUMP)
The Weldon Billet Fuel Filters with 100 micron stainless steel elements are designed to be a PRE-pump filter. These filters are available with -8AN, -10AN or -12AN inlet and outlet ports.
Universal Application.
WEQ08100SSN,WEQ10100SSN,WEQ12100SSN |
|
FUELAB 818 SERIES IN-LINE 3" FUEL FILTER
Fuelab 818 Series In-Line 3" Fuel Filters are available in your choice of color with -6AN, -8AN, -10AN or -12AN inlet/outlet. Includes the 10 micron / Paper Element (Cellulose) - The most economical and commonly used element. It is disposable yet provides excellent filtration.
Universal Application.
81801,81802,81803,81804 |
|
FUELAB 828 SERIES IN-LINE 5" LONG FUEL FILTER
Fuelab 828 Series In-Line 5" Long Fuel Filters are available in your choice of color with -6AN, -8AN, -10AN or -12AN inlet/outlet. Includes the 10 micron / Paper Element (Cellulose) - The most economical and commonly used element. It is disposable yet provides excellent filtration.
Universal Application.
82801,82802,82803,82804 |
|
FUELAB 3" SHORT REPLACEMENT FILTER ELEMENT
Fuelab replacement filter elements for the 3" 818 short filters. Paper, stainless and micro-fiberglass are available.
Universal Application.
71801,71802,71803,71804 |
|
FUELAB 5" LONG REPLACEMENT FILTER ELEMENT
Fuelab replacement filter elements for the 5" 828 long filters. Paper, stainless and micro-fiberglass are available.
Universal Application.
71805,71806,71807,71808 |
|
RUSSELL FUEL FILTERS
The Russell Competition fuel filters are offered in -6 and -8 male outlets, which help them flow up to 130 gph. Russell incorporated a disc-type element, which filters down to 40 microns and can be cleaned or replaced. Manufactured from billet aluminum with a polished aluminum, black anodized finish, the Russell Competition fuel filters make a great addition to your fuel system.
Universal Application.
650133,650103 |
|
AEM FLEX FUEL ETHANOL CONTENT SENSOR KITS
These AEM Kits measure a vehicle's fuel ethanol content percentage and temperature, which allows users with programmable engine management systems (capable of tuning for flex fuel) the ability to optimize an engine's tuning calibration for fuel ethanol content. This sensor is ideal for use with AEM's Infinity & Series 2 EMS. Available with 3/8" barb fittings or -6AN.
Universal Application.
30-2200,30-2201 |
|
ZEITRONIX ETHANOL CONTENT ANALYZER ECA-2 KIT
Ever wonder if that E85 you just filled up on is good? Now you can have that piece of mind before you decide to go WOT. The Zeitronix ECA-2 Ethanol Content Analyzer allows you to monitor your current Ethanol percentage and fuel temperature which can be used with ECU's, data logging and engine management systems.
Universal Application.
ZEI-ECA-2-KIT+E% |
|
E85 TESTER
Simply and accurately check the percentage of ethanol content in your E85 fuel. Simple to use, just add water to the lowest line and fill to the highest line with your fuel. Shake and let set for a few minutes. There will be a line of separation telling you what percentage your fuel really is. Yes its that easy.
Universal Application.
E85,TESTER |
|
RED LINE SI-1 COMPLETE FUEL SYSTEM CLEANER
Red Line SI-1 Complete Fuel System Cleaner cleans injectors, carburetors, valve and combustion chamber deposits with a concentrated blend of the most powerful high-temp and low-temp detergents available. Also use in smaller doses for maintenance as one bottle treats up to 100 gallons. Available in a 4oz or 15oz bottle.
Universal Application.
60101,60103 |
|
AMSOIL FUEL ADDITIVES
STM is an official AMSOIL dealer. We offer AMSOIL's full line of fuel additive, cleaning and booster products! As per AMSOIL regulations, please call to order AMSOIL products.
APICN,AQSCN,ASTCN,AOBBE,MOBCN |
|
