|
EVOLUTION VIII-IX - INTERCOOLERS & KITS
///
BACK TO TOP |
|
|
STM EVO 8/9 HIGH HP FRONT MOUNT INTERCOOLER (650 HP+)
The STM High HP Intercooler is made in-house from a 900 HP-rated 3.8" Garrett core with tig-welded, aluminum end tanks and bead-rolled 2.5" or 3" pipe outlets. Pressure tested to 50 psi and fits both Evo 8 and 9 bumpers. This intercooler features a stock-replacement fit and will bolt right up to your factory couplers, or stock-location, aftermarket piping.
2003-2006 Evolution VIII-IX.
STM-EVO89-FMIC-HHP |
|
STM EVO 8/9 STANDARD STREET FRONT MOUNT INTERCOOLER
We realize the market is in need of a less expensive alternative for street-driven Evo's, and so we present the new STM Standard Street Front Mount Intercooler for the Evo 8/9. Even though this core is capable of flowing 850 HP we sugest using it on cars producing 650 and less. For anything over 650+, we run the STM HIGH HP Intercooler.
2003-2006 Evolution VIII-IX.
STM-EVO89-FMIC-ST |
|
BUSCHUR RACE CORE & BFIC
Buschur has tested the Race core time and again and with the addition of this on a 600whp Evolution it picked up 57WHP over a competitors intercooler that was being used previously to this being installed. This is a great bolt on even if you are using the stock turbo it is capable of making at LEAST an additional 15WHP.
2003-2006 Evolution VIII & IX.
BUSCHUR,FMIC,BFIC |
|
BUSCHUR STREET CORE
The Buschur Street Core requires no cutting or modifications to the vehicle other than minor trimming of the front lower splash shield. The core is rated for 950hp with very minimal pressure drop and measures in at 24x13x3.5.
2003-2006 Evolution VIII & IX.
BUSCHUR,FMIC,STREET |
|
ETS CUSCO POWER BRACE INTERCOOLER
The ETS Cusco Power Brace Intercooler is built to fit behind the Cusco Power Brace. Available in 3" or 3.5" cores, the kit includes the intercooler, mounting hardware, silicone couplers, and SS T-Bolt Clamps. Anodizing is available in 4 different colors. Pressure checked to 35psi.
2003-2006 Evolution VIII & IX.
ETS |
|
ETS FRONT MOUNT INTERCOOLER KIT
The ETS Evo VIII-IX Intercooler features bolt on installation, eliminates the two up-pipes to the intercooler and fills the whole grill with core for a killer look and maximum efficiency. This unit also retains the factory crash bar and splash pans (3" and 3.5"). The kit includes the intercooler, mounting hardware, silicone couplers, SS T-Bolt Clamps and many pipe routing options. Anodizing is available in 4 different colors.
2003-2006 Evolution VIII & IX.
EVO89_IC_KIT |
|
ETS STANDARD TANK INTERCOOLER (EVO VIII)
The ETS Evo VIII Intercooler features bolt on installation, eliminates the two up-pipes to the intercooler and fills the whole grill with core for a killer look and maximum efficiency. This unit also retains the factory crash bar and splash pans (3" and 3.5"). The kit includes the intercooler, mounting hardware, silicone couplers, and SS T-Bolt Clamps. Anodizing is available in 4 different colors.
2003-2005 Evolution VIII.
EVO8_STD_IC |
|
ETS WIDE TANK INTERCOOLER (EVO IX
This intercooler was designed for the Evolution 9 front bumper cover. The Evolution 9 has a bumper cover opening of 22" where the standard tank intercooler is a 24" core. ETS designed the wide tank to have a 22" core and wider end tanks for better air distribution through the core and maximize surface area. Anodizing is available in 4 different colors.
2006 Evolution IX.
EVO9_WT_IC |
|
|
EVOLUTION VIII-IX - INTERCOOLER PIPING
///
BACK TO TOP |
|
|
STM EVO 8/9 2.5" TITANIUM UPPER INTERCOOLER PIPE KIT
(PIE-CUT TIG-WELDED BURNED BLUE TITANIUM)
Features pie-cut, tig welded 2.5" titanium tubing for strength and durability, then burned a beautiful blue/purple/gold hue for the show-winning presentation. Available with either a stock or TiAL flange and the option for an AIT bung.
2001-2006 Evolution 7/8/9.
STM-EVO79-UICP-TI-BRN |
|
STM EVO 8/9 2.5" TITANIUM UPPER INTERCOOLER PIPE KIT
(PIE-CUT TIG-WELDED TITANIUM)
The STM 2.5" Titanium Upper Intercooler Pipe Kit for the Evolution VIII-IX is pie-cut and tig welded from 2.5" titanium tubing for strength, durability and general awesomeness. Available with either a stock or TiAL flange and the option for an AIT bung.
2001-2006 Evolution 7/8/9.
STM-EVO79-UICP-TI |
|
STM EVO 8/9 2.5" ALUMINUM UPPER INTERCOOLER PIPE KIT
(GLOSS BLACK POWDERCOAT)
The STM 2.5" Upper Intercooler Pipe Kit for the Evolution VIII-IX features smooth, mandrel bent, lightweight 2.5" aluminum piping with bead-rolled ends and powdercoated with a durable, gloss black finish with your choice of blow off valve flange and the option for an AIT bung.
2001-2006 Evolution 7/8/9.
STM-EVO79-UICP-AL-BK |
|
STM EVO 8/9 2.5" ALUMINUM UPPER INTERCOOLER PIPE KIT
(WRINKLE BLACK POWDERCOAT)
The STM 2.5" Upper Intercooler Pipe Kit for the Evolution VIII-IX features smooth, mandrel bent, lightweight 2.5" aluminum piping with bead-rolled ends and powdercoated with a durable, gloss black finish with your choice of blow off valve flange and the option for an AIT bung.
2001-2006 Evolution 7/8/9.
STM-UICP |
|
STM EVO 8/9 2.5" ALUMINUM UPPER INTERCOOLER PIPE KIT
(MIRROR POLISH)
The STM 2.5" Upper Intercooler Pipe Kit for the Evolution VIII-IX features smooth, mandrel bent, lightweight 2.5" aluminum piping with bead-rolled ends and polished to a mirror finish with your choice of blow off valve flange and the option for an AIT bung.
2001-2006 Evolution 7/8/9.
STM-UICP |
|
STM EVO 8/9 2.5" ALUMINUM UPPER INTERCOOLER PIPE KIT
(BRUSHED SATIN)
The STM 2.5" Upper Intercooler Pipe Kit for the Evolution VIII-IX features smooth, mandrel bent, lightweight 2.5" aluminum piping with bead-rolled ends and a brushed, satin finish with your choice of blow off valve flange and the option for an AIT bung.
2001-2006 Evolution 7/8/9.
STM-UICP |
|
STM 3" ALUMINUM UPPER INTERCOOLER RACE PIPE KIT
The STM 3" Aluminum Upper Intercooler Race Pipe Kit for the Evo VIII-IX is tig welded, 3" aluminum piping for those needing a little extra capacity for their boost! The 3" aluminum features light-weight benefits and includes 6 stainless T-Bolt clamps and 3 high-quality black, silicone couplers. We run 3" piping on our cars up to 50 psi.
2003-2006 Evolution VIII & IX. (NON-ACD)
STM-RUICP |
|
STM 2.5" ALUMINUM LOWER INTERCOOLER PIPE
(STM FORWARD-FACING TURBO)
The STM Aluminum Lower Intercooler Pipe is designed specifically for the STM T3 Forward Facing Manifold on the Evo 8/9. Features lightweight, tig welded, 2.5" aluminum piping and includes high quality STM silicone couplers and stainless T-Clamps and is available with 3 different finish options.
2003-2006 Evolution VIII & IX.
STM-EVO-LICP-FF |
|
STM 2.5" ALUMINUM LOWER INTERCOOLER PIPE
(STOCK-FRAME TURBO)
The STM Aluminum Lower Intercooler Pipe is designed to replace your existing, stock piping. Features lightweight, tig welded, 2.5" aluminum piping and will fit with the factory VIII or IX turbo or stock frame turbos like the FP Red or MAP EF3.
2003-2006 Evolution VIII & IX.
STM-EVO-LICP-AL |
|
STM 2.5" STAINLESS LOWER INTERCOOLER PIPE
(STOCK-FRAME TURBO)
The STM Stainless Lower Intercooler Pipe is designed to replace your existing, stock piping. Features durable tig welded, 2.5" stainless steel piping and will fit with the factory VIII or IX turbo or stock frame turbos like the FP Red or MAP EF3.
2003-2006 Evolution VIII & IX.
STM-EVO-LICP-SS |
|
STM 2"-2.5" 90° COMPRESSOR OUTLET PIPE KIT
This STM 2" 90° Compressor Outlet Pipe Kit allows you to take a down-firing or up-firing 2" compressor outlet and bring it to either side, where most intercooler piping is typically located. We include new stainless T-clamps, a 2.5" brushed aluminum joiner in a 6" or 8" length and a 2" to 2.5" high-quality 90° reducing silicone coupler.
Universal Application.
STM |
|
STM 2.5" 90° COMPRESSOR OUTLET PIPE KIT
This STM 2.5" 90° Compressor Outlet Pipe Kit allows you to take a down-firing or up-firing 2.5" compressor outlet and bring it to either side, where most intercooler piping is typically located. We include new stainless T-clamps, a 2.5" brushed aluminum joiner in a 6" or 8" length and a 2.5" high-quality 90° silicone coupler with 10" legs that you can easily cut to fit your exact set-up.
Universal Application.
STM-COM-OUT-PK-2.5 |
|
STM ALUMINUM JOINERS
The STM Aluminum Joiners are available in either 2.5" or 3" diameter in various lengths. Features a brushed aluminum finish and bead rolled ends.
Universal Application.
STM-AL-JOIN |
|
