|
1990-1999 DSM - OIL LINES
///
BACK TO TOP |
|
|
STM OIL FEED LINE KIT (FROM OIL FILTER HOUSING)
FOR GARRETT BALL BEARING GT30/35R STYLE TURBO
The STM Turbo Oil Feed Line Kit features a 24" stainless, braided, -4AN line to run from your oil filter housing to Garrett-style ball bearing turbo or center section requiring a 7-1/16 x 24 inverted flare restrictor fitting. The kit also includes a 3/8" BSPT to -4AN fitting to screw into the oil filter housing without destroying your threads.
1990-1999 1G & 2G DSM.
STM-DSM-GTBB-OFLK |
|
STM OIL FEED LINE KIT (FROM OIL FILTER HOUSING)
FOR PTE-STYLE / GARRETT JOURNAL BEARING 1/8" NPT INLET
The STM Turbo Oil Feed Line Kit for PTE-Style (1/8" NPT Inlet) center sections features a 24" stainless, braided, -4AN line to run from your oil filter housing to turbo center section. The kit also includes a 1/8" to -4AN fitting for your turbo and a 3/8" BSPT to -4AN fitting to screw into the oil filter housing without destroying your threads.
1990-1999 1G & 2G DSM.
STM-DSM-NONBB-OFLK |
|
STM OIL FEED LINE KIT (FROM OIL FILTER HOUSING)
FOR 16G-STYLE TURBO
The STM Turbo Oil Feed Line Kit features a 24" stainless, braided, -4AN line to run from your oil filter housing to 16G/14B turbo or center section requiring a 12MM x 1.25 fitting. The kit also includes a 3/8" BSPT to -4AN fitting to screw into the oil filter housing without destroying your threads.
1990-1999 1G & 2G DSM.
STM-DSM-16G-OFLK |
|
STM -4AN STAINLESS BRAIDED TURBO OIL FEED LINES
The STM -4AN Stainless Braided Turbo Oil Feed Lines are available in 4 lengths (28", 24", 18" or 14") and feature one straight end and one 90° end with swivel fittings for an easy install. Proudly made in the USA!
Universal Application.
690428,690424,690418,690414 |
|
STM PUSHLOCK -10AN TURBO OIL RETURN LINE (MITSU-SERIES)
STM Pushlock -10AN Turbo Oil Return Line Kit for Mitsubishi-Series Turbos includes easy to work with Pushlock line and black fittings. The Mitsu-Series Flanges typically fit the 14B, 16G, T25 and T28 among many other applications. Provides enough line to work with most Forward-Facing and Standard Placement Turbo Kits.
1990-1999 1G & 2G DSM.
STM-TORLP-MIT |
|
STM BRAIDED NYLON -10AN TURBO OIL RETURN LINE (MITSU-SERIES)
STM Braided Nylon -10AN Turbo Oil Return Line Kit for Mitsubishi-Series Turbos includes soft Braided Nylon line and black fittings. The Mitsu-Series Flanges typically fit the 14B, 16G, T25 and T28 turbos among many other applications. Provides enough line to work with most Forward-Facing and Standard Placement Turbo Kits.
1990-1999 1G & 2G DSM.
STM-TORLB-MIT |
|
STM PUSHLOCK -10AN TURBO OIL RETURN LINE (GT-SERIES)
STM Pushlock -10AN Turbo Oil Return Line Kit for GT-Series Turbos includes easy to work with Pushlock line and black fittings. The GT-Series Flanges typically fit the GT Garrett Series, most T3 FP turbos among many other applications. Provides enough line to work with most Forward-Facing and Standard Placement Turbo Kits.
1990-1999 1G & 2G DSM.
STM-TORLP-GT |
|
STM BRAIDED NYLON -10AN TURBO OIL RETURN LINE (GT-SERIES)
STM Braided Nylon -10AN Turbo Oil Return Line Kit for GT-Series Turbos includes soft Braided Nylon line and black fittings. The GT-Series Flanges typically fit the GT Garrett Series, most T3 FP turbos among many other applications. Provides enough line to work with most Forward-Facing and Standard Placement Turbo Kits.
1990-1999 1G & 2G DSM.
STM-TORLB-GT |
|
STM PUSHLOCK -10AN TURBO OIL RETURN LINE (G-SERIES)
STM Pushlock -10AN Turbo Oil Return Line Kit for G-Series Turbos includes easy to work with Pushlock line and black fittings. The G-Series Flanges typically fit the PTE Turbos and Non-Ball-Bearing Garrett Turbos among many other applications. Provides enough line to work with most Forward-Facing and Standard Placement Turbo Kits.
1990-1999 1G & 2G DSM.
STM-TORLP-G |
|
STM BRAIDED NYLON -10AN TURBO OIL RETURN LINE (G-SERIES)
STM Braided Nylon -10AN Turbo Oil Return Line Kit for G-Series Turbos includes soft Braided Nylon line and black fittings. The G-Series Flanges typically fit the PTE Turbos and Non-Ball-Bearing Garrett Turbos among many other applications. Provides enough line to work with most Forward-Facing and Standard Placement Turbo Kits.
1990-1999 1G & 2G DSM.
STM-TORLB-G |
|
1990-1999 DSM - OIL FITTINGS
///
BACK TO TOP |
|
|
STM -10AN TURBO OIL DRAIN FITTING (G-SERIES)
The STM -10AN G-Series Turbo Oil Drain Fitting is machined aluminum, made in Rochester, NY. These fittings typically fit the PTE Turbos and Non-Ball-Bearing Garrett Turbos among many other applications. Fitting measures 2" from bolt-hole to bolt-hole. Gasket is included.
Universal Application.
STM-ODF-G |
|
STM -10AN TURBO OIL DRAIN FITTING (GT-SERIES)
The STM -10AN G-Series Turbo Oil Drain Fitting is machined aluminum, made in Rochester, NY. These fittings typically fit the GT Garrett Series, most T3 FP Turbos among many other applications. Fitting measures 1.5" from bolt-hole to bolt-hole. Gasket is included.
Universal Application.
STM-ODF-GT |
|
STM -10AN TURBO OIL DRAIN FITTING (MITSU-SERIES)
The STM -10AN Mitsu-Series Turbo Oil Drain Fitting is machined aluminum, made in Rochester, NY. These fittings typically fit the Mitsubishi 14B, 16G, T25, T28 and bolt-on Evo 8/9 turbos among many other applications. Fitting measures 1.5" from bolt-hole to bolt-hole. Gasket is included.
Universal Application.
STM-ODF-MIT |
|
VIBRANT 1/8" TURBO OIL FEED FLANGE
The Vibrant Performance Turbo Oil Feed Flange is designed for Garrett T3, T3/T4 and T04 turbos that do not have a tapped oil feed inlet and therefore a flange must be used for installing the oil feed line.
Universal Application.
2899 |
|
VIBRANT TURBO OIL FLANGE FOR GT32-GT55R TURBOS
The Vibrant Performance Turbo Oil Flange is designed to be used with GT32-GT55R turbos. Made of T6061 billet aluminum and the center hole is threaded for a 1/2" NPT fitting. Includes two M8 x 1.25 bolts.
Universal Application.
2853 |
|
VIBRANT TURBO OIL DRAIN FLANGE FOR T3, T3/T4 & T04 TURBOS
The Vibrant Performance Turbo Oil Drain Flange is designed to be used with T3, T3/T4 and T04 turbos. Made of T6061 billet aluminum and the center hole is threaded for a 1/2" NPT fitting. Includes two M8 x 1.25 bolts.
Universal Application.
2898 |
|
VIBRANT TURBO OIL DRAIN FLANGE FOR GT SERIES BB TURBOS
The Vibrant Performance Turbo Oil Drain Flange is designed to be used with GT25R, GT28R, GT30R and GT35R ball bearing turbos. Made of T6061 billet aluminum and the center hole is threaded for a 1/2" NPT fitting. Includes two M8 x 1.25 bolts.
Universal Application.
2889 |
|
VIBRANT TURBO OIL DRAIN FLANGE WITH -10AN FITTING FOR GT15-GT35 TURBOS
The Vibrant Performance Turbo Oil Drain Flange with -10AN Fitting is designed to be used with GT15-GT35 turbos. Made of T6061 billet aluminum and CNC machined with a -10AN fitting. Includes two M8 x 1.25 bolts.
Universal Application.
2893 |
|
STM GARRETT DUAL BALL-BEARING OIL RESTRICTOR FITTING
The STM Garrett Dual Ball-Bearing Oil Restrictor Fitting features a .035" restrictor hole size and works with Garrett GT30/35R style turbos or any turbo requiring a 7-1/16" x 24 inverted flare restrictor fitting.
Universal Application.
STM-10716-04TR |
|
STM 3/8" BSPT TO -4AN FITTING
The STM 3/8" BSPT to -4AN Fitting is generally used to attach a turbo oil feed line to your 3/8" BSPT oil filter housing.
Universal Application.
STM-742-04-06S |
|
OEM MITSUBISHI CYLINDER HEAD OIL FEED PLUG
Genuine OEM Mitsubishi Cylinder Head Oil Feed Plug. When feeding your turbo from the oil filter housing, you need to plug the factory hole on a 1G head. This is the plug and crush washer you'll need.
1990-1999 1G & 2G DSM.
MD137353 |
|
-4AN 90° TO 3/8" NPT MALE STEEL TURBO ADAPTER FITTING
-4AN 90° to 3/8" NPT Male Steel Adapter Turbo Oil Fitting.
Universal Application.
TF-782246 |
|
VIBRANT OIL RESTRICTOR FITTINGS WITH ADJUSTABLE JETS
These Vibrant Performance PTFE Lined Stainless Steel Oil Restrictor Fittings include two different sized fittings, allowing you to effectively limit oil flow to your turbo, thereby minimizing the potential for damaging the oil seals.
Universal Application.
10289,10288,10287 |
|
STM BALL BEARING WATER LINE BANJO BOLT KIT (18MM x 1.5)
The STM Ball Bearing Water Line Banjo Bolt Kit is comprised of high-quality fittings and copper crush washers to allow you to adapt a -6AN hose to the water jackets of your turbo. Fits GT37 and larger housings or any turbo that requires M18 x 1.5mm fittings.
Universal Application.
STM-WBK-186 |
|
STM BALL BEARING WATER LINE BANJO BOLT KIT (14MM x 1.5)
The STM Ball Bearing Water Line Banjo Bolt Kit is comprised of high-quality fittings and copper crush washers to allow you to adapt a 3/8" hose to the water jackets of your turbo. Fits T2, GT25, GT30, GT35 and MHI TD05 housings or any turbo that requires M14 x 1.5mm fittings.
Universal Application.
STM-WBK-146 |
|
TECHNA-FIT UNIVERSAL BANJO BOLTS
Techna-Fit Steel Banjo Bolts are sold individually below and the perfect source for your custom brakes or turbo oil lines.
Universal Application.
TF-775 |
|
TECHNA-FIT UNIVERSAL BANJO FITTINGS
Techna-Fit Steel Banjo Fittings are sold individually below and the perfect source for your custom fluid lines.
Universal Application.
TF-776,TF-P776 |
|
COPPER CRUSH WASHERS FOR BANJO BOLTS
Universal Copper Crush Washers for Banjo Bolts are available in sizes from 10, 12, 14, 16 and 18mm.
Universal Application.
CCW |
|
1990-1999 DSM - OIL FILTERS
///
BACK TO TOP |
|
|
FP -4AN IN-LINE RED OIL FILTER FOR JOURNAL BEARING TURBOS
The body of the red filter features a built in .125" orifice for full flow journal bearing turbos. The Forced Performance -4AN In-Line Oil Filter is made with female 4AN at the inlet side and male 4AN at the outlet side. This allows the filter to install into virtually any 4AN line without additional fittings.
For Journal Bearing Turbos.
FP-4ANFILTER-RED |
|
FP -4AN IN-LINE BLACK OIL FILTER FOR BALL BEARING TURBOS
The body of the black filter features a built in .030" restrictor as recommended by Garrett for use with their GT25R, GT30R, GT35R cartridges. The Forced Performance -4AN In-Line Oil Filter is made with female 4AN at the inlet side and male 4AN at the outlet side. This allows the filter to install into virtually any 4AN line without additional fittings.
For Ball-Bearing Turbos.
FP-4ANFILTER-BLK |
|
FP REPLACEMENT -4AN OIL FILTER ELEMENT
The Forced Performance Replacement Filter Element and O-Ring for the FP -4AN Inline Oil Filters fits both the black and red filter styles.
Fits FP -4AN Black and Red Filters
FILTERELEMENT |
|
EARL'S -4AN INLINE OIL FILTER
Earl's Performance has your pluming needs covered with these screen-type inline oil filters. They are designed for use as pre-filters for fuel and oil systems. They easily disassemble for inspection and cleaning to get the job done right the first time around.
Universal Application.
AT230204ERL |
|
|
1990-1999 DSM - INSTALL KITS & PARTS
///
BACK TO TOP |
|
|
STM OEM TURBO WATER LINE KIT (90-94 1G)
If you're putting in a new turbo, don't even mess with those rusted, old lines... Just get some new ones! Comes with all new OEM Mitsubishi parts shown for your 1G, 90-94 DSM.
1990-1994 1G DSM.
STM-1G-MTWLK
MD117764, MD140476, MF650114(2), MF660065(4) |
|
OEM MITSUBISHI TURBO COOLANT FEED HOSE (95-99 2G)
Genuine OEM Mitsubishi Turbo Coolant Feed Hose for the 1995-1999 Mitsubishi Eclipse GST & GSX.
1995-1999 2G DSM.
MD306415 |
|
OEM MITSUBISHI TURBO WATER LINE
Genuine OEM Mitsubishi Turbo Water Line for 1995-1999 2G DSM Eclipse & Talon models. OEM Mitsubishi Copper Crush Washer and Eye Bolt are also available in the purchase menu.
1995-1999 2G DSM.
MD306413,MF660065,MD314117 |
|
OIL RETURN LINE (TURBO TO OIL PAN) (90-94 1G)
Genuine OEM Mitsubishi Oil Return Pipe (Turbo to Oil Pan) for 1990-1994 1G DSM.
1990-1994 1G DSM.
MD150523 |
|
OIL RETURN LINE (TURBO TO OIL PAN) (95-99 2G)
Genuine OEM Mitsubishi Oil Return Pipe (Turbo to Oil Pan) for 1995-1999 2G DSM.
1995-1999 2G DSM.
MD189736 |
|
EXTREME PSI 16G INSTALL KIT (2G 95-99)
The new V2 install kits from Extreme Psi include the stainless steel J-pipe from turbo to side mount, stainless steel oil feed line, socketless oil return line kit, turbo to manifold gasket, O2 housing gasket, couplers, T-bolt clamps, 2 oil return gaskets, bolts and washers.
1995-1999 2G DSM.
PSI-JPIPEKIT-2GK-BK |
|
LOWER TURBO HEATSHIELD (95-99 2G)
OEM Mitsubishi Lower Turbo Heatshield.
1995-1999 2G DSM.
MR188005 |
|
|
1990-1999 DSM - TURBO & OIL GASKETS
///
BACK TO TOP |
|
|
STM STAINLESS STEEL 7CM TURBO INLET GASKET
The STM 7cm Turbo Inlet Gasket features a 20 gauge thickness, cut from T304 Stainless Steel and made in the USA! Works with 16G, 18G and 20G Turbos.
1990-1999 1G & 2G DSM.
STM-SSG-7CMI |
|
STM EVO III 16G O2 HOUSING GASKET
The STM o2 Housing Gasket for Evo III 16G Turbo features a 20 gauge thickness, cut from T304 Stainless Steel and made in the USA!
1990-1999 DSM with Evo III 16G Turbo.
STM-EVO3-SSG-DTO |
|
OEM MITSUBISHI TURBO TO O2 HOUSING GASKETS
Genuine OEM Mitsubishi O2 Housing to Turbo Gasket. 90-99 DSM and Evo III gaskets are available.
1990-1999 1G & 2G DSM and Evo III.
MD191897,MD191897 |
|
T4 DIVIDED TURBO GASKET
Vibrant Performance Stainless Steel T4 Divided Turbo Gasket.
Universal Application.
1442G |
|
T4 UNDIVIDED TURBO GASKET
Vibrant Performance Stainless Steel T4 Undivided Turbo Gasket.
Universal Application.
1441G |
|
GT SERIES TURBO GASKET
Vibrant Performance Stainless Steel GT Series Turbo Gasket. 3" for newer generation GT housings and 2.5" available.
Universal Application.
1439G,1438G |
|
OEM MITSUBISHI 14B/16G OUTLET / J-PIPE GASKET
OEM Gasket fits 14b, 16g, 18g or 20g turbos with these compressor covers.
1990-1999 1G & 2G DSM.
MD189460 |
|
OEM MITSUBISHI OIL RETURN LINE TO OIL PAN BOLT & GASKET KIT
Genuine OEM Mitsubishi Oil Return Line to Oil Pan Bolt & Gasket Kit.
Fits all 4G63 Evo VIII-IX, 6-Bolt and 7-Bolt DSM oil pans.
1990-1999 1G & 2G DSM.
[OEM-4G63-OPBGK]
MN156739(x2),MR497720(x2),MR258477(x1) |
|
OEM MITSUBISHI TURBO OIL RETURN GASKET
Genuine OEM Mitsubishi Turbo Oil Return Gasket.
1990-1999 1G & 2G DSM.
MR258477 |
|
OEM MITSUBISHI TURBO TO OIL RETURN LINE GASKET (T25/T28)
OEM Mitsubishi T25/T28 Turbo to Oil Return Line Gasket.
1990-1999 1G & 2G DSM.
MD198888 |
|
|
1990-1999 DSM - HARDWARE
///
BACK TO TOP |
|
|
ARP STAINLESS TURBO TO MANIFOLD BOLTS (90-99 DSM)
ARP Stainless Steel Turbo to Manifold Bolt Set features strength, durability and piece of mind. ARP's Stainless Steel, 12 point Turbo Bolt Set includes 4 M10 x 1.25 x 80 bolts and 4 washers.
1990-1999 1G & 2G DSM.
773-1010 |
|
ARP CHROMOLY TURBO TO MANIFOLD BOLTS (90-99 DSM)
ARP Chromoly/Black Oxide Turbo to Manifold Bolt Set features specially heat-treated 8740 chromemoly bolts feature a black oxide finish. They are nominally rated at 170,000 psi tensile strength to provide a substantial extra margin of safety over Grade 8 hardware. ARP's Chromoly Steel, 12 point Turbo Bolt Set includes 4 M10 x 1.25 x 80 bolts and 4 washers.
1990-1999 1G & 2G DSM.
673-1010 |
|
OEM MITSUBISHI TURBO TO MANIFOLD BOLT
Genuine OEM mitsubishi Turbo to Manifold Bolt.
Sold individually.
1990-1999 1G & 2G DSM.
MD132656 |
|
OEM MITSUBISHI O2 HOUSING TO DOWNPIPE NUT
Genuine OEM Mitsubishi O2 Housing to Downpipe Nut.
1990-1999 1G & 2G DSM.
MB059359 |
|
OEM MITSUBISHI O2 HOUSING TO DOWNPIPE STUD
Genuine OEM Mitsubishi O2 Housing to Downpipe Stud.
1990-1999 1G & 2G DSM.
MD089315 |
|
OEM MITSUBISHI TURBO TO O2 HOUSING STUD
Genuine OEM Mitsubishi Turbo to O2 Housing Stud for all 90-99 1G & 2G DSM.
1990-1999 1G & 2G DSM.
MD050075 |
|
OEM MITSUBISHI O2 HOUSING BOLT
OEM Mitsubishi O2 Housing Bolt.
1990-1999 1G & 2G DSM.
MD062961 |
|
OEM MITSUBISHI TURBO TO MANIFOLD NUT
Genuine OEM Mitsubishi Turbo to Manifold Nuts. Sold individually. Click for exact placement. That is unfortunately not a typo. They are $12 each!
1990-1999 1G & 2G DSM.
MD132930 |
|
OEM MITSUBISHI O2 HOUSING NUTS
Genuine OEM Mitsubishi O2 Housing Nut fits all the Evolution VIII & IX models and 1990-1999 DSM. Sold individually. Mitsubishi possibly forged these from a meteorite for that price.
1990-1999 1G & 2G DSM.
MD050073 |
|
|
OEM MITSUBISHI TURBO TO MANIFOLD BOLTS
Save yourself the headache of broken bolts and replace them with these brand new Mitsubishi ones.
1990-1999 1G & 2G DSM.
MD132656 |
|
OEM MITSUBISHI TURBO LOCK WASHERS
Mitsubishi spring washers press upwards as you tighten them, keeping things snug, but they will wear out with high mileage.
1990-1999 1G & 2G DSM.
MR187848 |
|
|
1990-1999 DSM - BOOST LEAK TESTERS
///
BACK TO TOP |
|
|
STM BOOST LEAK TESTERS
One of the easiest ways to lose power is to have a simple leak in your system. The STM Boost Leak Tester comes with the STM Reducer Coupler to match your turbo inlet from 1.75" to 4" compressor, T-Clamps and 3" aluminum coupler with nozzle to test your boost pressure and ensure your set-up is solid.
Universal Application.
STM BOOST LEAK TESTER |
|
|
UNIVERSAL - TURBO BLANKETS & WRAP
///
BACK TO TOP |
|
|
DEI DEI TITANIUM TURBO SHIELDS
Custom fit T25/T28, T3, T4 or T6 Titanium Turbo Shields with LR Technology provide the ultimate means of reducing turbo lag while serving as a superior heat barrier - shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
T25/T28, T3, T4 and T6 Turbos.
010140,010141,010144,010145,010146,010147,010148,010149 |
|
PROSPORT FIBERGLASS HEADER WRAP
Durable, tight woven, 100% Fiberglass, thermo heat wrap is easy to install. One roll will wrap one medium-sized header. This material was hand picked for its heat characteristics and most importantly the flexibility, making wrapping headers much easier. 2" 50' roll.
Universal Application.
HEA-WRAP-KIT-BLK |
|
DEI EXHAUST WRAP
DEI's hi-temp fiberglass composite material is designed to keep heat in the exhaust and evacuate it out of the engine compartment. Wrapping your headers will reduce underhood temperatures by up to 50% while providing additional horsepower and engine protection. From 1" x 15' to 2" x 100'.
Universal Application.
010120,010107,010118,010121,010108,010116
010105,010101,010117,010106,010102,010103 |
|
DEI TITANIUM EXHAUST WRAP
Titanium exhaust wrap, with LR Technology, is made from pulverized lava rock and stranded into a fiber material and is engineered to be stronger than typical wraps on the market today. It has the ability to handle higher heat for improved performance and durability - and with a cool carbon fiber look! From 1" x 15' to 2" x 100'.
Universal Application.
010128,010126,010133,010129,010131,010132,010127,010130 |
|
DEI LOCKING TIES
Keep your exhaust wrap in its place. DEI's fireproof stainless steel locking ties have a melting temperature of 2,500° F. They are rust resistant and non-magnetic. 8" or 14" ties.
Universal Application.
010201,010202 |
|
DEI HIGH-TEMP SILICONE COATING
Provides lasting protection for any hot surface up to 1500 degrees. DEI recommend the use of this black coating with their exhaust wrap because it seals the material and provides lasting protection from oil, dirt and road grime.
Universal Application. (Shipping to Lower 48 US Only)
010301 |
|
|
UNIVERSAL - SHROUDS & REFLECTIVE TAPE
///
BACK TO TOP |
|
|
DEI REFLECT-A-GOLD | ADHESIVE SHEETS
This state-of-the-art polymer is extremely light weight and capable of handling continual operating temperatures up to 850°F. Highly effective material for firewalls, fuel cells, engine covers, etc. and can reflect up to 80% of radiant heat. Available in a variety of sizes.
Universal Application.
010391,010392,010393,010394,010395,010396,010397 |
|
DEI HEAT & SOUND INSULATION
Floor and Tunnel Shield Heat & Sound Insulation was designed to withstand direct temperatures up to 1750°F, providing the optimal way to reflect noise and heat away from vehicle components and perfect for protecting under hoods, firewalls, fuel cells, exterior areas such as transmission tunnel, floorpans and other under-vehicle locations. Available in a variety of sizes.
Universal Application.
050501,050502,050503 |
|
DEI HEAT SCREEN
Excellent way to reflect radiant heat away from a vehicle's interior and because of its flexibility, this 36"x40" roll can be trimmed to size to protect against excessive heat sources. Features a thermal barrier on one side made of a superior reflective aluminized mylar surface capable of withstanding direct heat up to 1200°F.
Universal Application.
010401 |
|
DEI REFLECT-A-COOL | SELF ADHESIVE SHEETS
Constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F and 2000°F of radiant heat. Reflect-A-Cool can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Available in a variety of sizes.
Universal Application.
010460,010461,010462,010412 |
|
DEI COOL TAPE
Cool-Tape offers a flexible, easy to apply and ultra light weight solution to reflect heat and ideal for wrapping wiring, cables, hoses, fuel lines and covering seams. Made of one mil aluminized material bonded to woven fiberglass, Cool-Tape has a super strong self-adhesive backing capable of protecting up to 2000°F radiant heat. Available in a variety of sizes.
Universal Application.
010408,010416,010413 |
|
DEI WIRE/HOSE HEAT SHROUD
Made from hi-temp fiberglass fabric bonded to an aluminized material with the added convenience of a hook & loop closure design. Simply wrap Heat Shroud around wires, cables or hoses without the need of removing one end. Protects against oil, dirt and road grime and can be shaped to fit the tightest bends and offers the versatility of fitting diameters from 1/2" to 1 1/4".
Universal Application.
010405 |
|
DEI HEAT SHEATH ALUMINIZED SLEEVING
Designed to slide over wires, cables and hoses providing the ultimate protection from oil, dirt and road grime. Heat Sheath is very easy to work with and pliable enough to be shaped to fit the tightest bends. Heat Sheath is fireproof and will withstand 500°F direct continuous/2000°F radiant heat.
Universal Application.
010418,010403,010419,010404,010420 |
|
DEI FIRE SLEEVE & TAPE KIT
Ideal for protecting against intense underhood heat making it the perfect solution for insulating hoses, wiring, oil and fuel lines and more. Constructed of a woven insulated glass fiber braided sleeve heavily coated with 100% iron oxide silicone rubber, Fire Sleeve is capable of insulating and withstanding direct continuous temperatures up to 500°F. Includes a 16" length of Fire Tape.
Universal Application.
010470,010472,010474 |
|
DEI FIRE WRAP 3000
Made from woven insulated glass fiber braided sleeve heavily coated with 100% iron oxide silicone rubber as Fire Sleeve with the same features, benefits and advantages but with the added convenience of a hook & loop closure design. Simply wrap around wires, cables or hoses without the need of removing them.
Universal Application.
010477,010478,010479 |
|
DEI FIRE TAPE
Fire Tape is a non-adhesive silicone rubber tape that is self-bonding, self-curing and forms a permanent water-tight barrier that withstands 475°F direct continuous heat. Each roll is 1" wide x 36' length and includes a guide line for easy application.
Universal Application.
010476 |
|
