![](../main/vehicle/nissan_banner_gtr.jpg) |
|
R35 GT-R - MID PIPES
///
BACK TO TOP |
|
STM STAINLESS Y-PIPE WITH MUFFLER
The STM GTR Y-Pipe with Muffler features a fully T304 stainless construction, tig welded in-house. If you're looking to free up air flow, but don't want to attract too much attention to your car, this pipe is exactly what you need. This is the pipe we run on our 2015 GTR for daily use. Perfect sound, with added flow.
2009+ Nissan R35 GT-R.
STM-GTR-YPM-35,STM-GTR-YPM-3 |
|
STM STAINLESS Y-PIPE
The STM GTR Y-Pipe features a fully T304 stainless, hand built, tig welded design. This pipe will enhance the stock GTR growl just enough to make the exhaust audible, but not raspy, and also shaves 14 pounds off the weight of your car. This piece fits like stock and and includes all necessary hardware and gaskets for a clean and simple install.
2009+ Nissan R35 GT-R.
STM-GTR-YP-3,STM-GTR-YP-35 |
|
HKS NON-RESONATED Y-PIPE
The HKS Non-Resonated Y-Pipe features a straight-through design for racing applications This is the same piece found in the HKS GT570 and GT600 packages. This pipe eliminates the secondary catalytic converters and is for off-road, race use only.
2009+ Nissan R35 GT-R.
33004-KN002 |
|
HKS RESONATED Y-PIPE
The HKS Resonated Y-Pipe is tig-welded, SUS304 stainless steel and features a built-in resonator. This pipe eliminates the secondary catalytic converters and is for off-road, race use only.
2009+ Nissan R35 GT-R.
33004-KN001 |
|
TANABE CENTER PIPE
The Tanabe Center Pipe features large diameter and smoothly designed pipes to ensure maximum flow and performance from your exhaust. Every Tanabe center pipe is constructed from high grade SUS304 stainless steel for maximum durability and weight savings.
2009+ Nissan R35 GT-R.
T50146 |
R35 GT-R - DOWN PIPES
///
BACK TO TOP |
|
STM R35 GT-R STAINLESS STEEL DOWNPIPES
The STM Stainless Steel Downpipes are a direct replacement for the stock cat pipes and weigh significantly less! The STM Downpipes are USA made, tig welded and pack-purged stainless steel and are available with high-flow cats or as a race-only straight pipe with no cat.
2009+ Nissan R35 GT-R.
STM-GTR-CDP,STM-GTR-DP |
|
AMS 90MM CAST DOWNPIPES
The AMS 90mm Cast Widemouth Downpipes without Cat Converters are the best performing and most durable on the market. During testing with the AMS shop GT-R with AMS upgraded turbos, there were gains accross the power band of 100 wheel horsepower and over 130 ft lbs of torque with this simple bolt-on! Turbo spool-up was also improved by almost 400rpm!
2009+ Nissan R35 GT-R.
AMS |
|
AGENCY POWER CATLESS DOWN PIPES
Fits either stock or any aftermarket exhaust system. Constructed of durable, high quality 304 stainless in a full 3" diameter. The improved flow from the larger diameter catless pipes produce more power, keep boost pressure up and provide improved throttle response.
2009+ Nissan R35 GT-R.
AP-GTR-171 |
|
BUSCHUR RACING DOWNPIPES
The Buschur Racing GT-R 76.2mm Downpipes are a major key in unlocking your GT-R's performance. The Downpipes are built with a widemouth design for added flow and wastegate efficiency. During testing the gains were across the entire power band and turbo spool up was also improved!
2009+ Nissan R35 GT-R.
BR |
|
COBB NISSAN GT-R CATTED CAST BELLMOUTH DOWNPIPES
COBB would like to introduce its new and improved Nissan GT-R Catted Downpipes with cast bellmouth! These high-flow, mandrel-bent, 304-stainless downpipes allow for better flow, faster turbo-spool and improved transient response. The COBB catted cast bellmouth downpipes are a direct OEM replacement and will bolt up to the stock exhaust system or aftermarket systems alike.
2009+ Nissan R35 GT-R.
5C1201 |
|
EXTREME TURBO SYSTEMS DOWNPIPES
ETS Downpipes are one of the highest flowing downpipes on the market with no restrictions. Constructed of 304 stainless steel and 1/2" flanges to prevent warpage and maintain a perfectly smooth surface. These downpipes add a nice throaty sound under WOT and maintain a nice idle that fits the GT-R perfectly!
2009+ Nissan R35 GT-R.
ETS-GTR-DP-3 |
|
FATHOUSE FABRICATIONS DOWNPIPES
Fathouse Fabrications Stainless Steel Downpipes.
2009+ Nissan R35 GT-R.
FAB |
|
NISSAN PARTS
Take a look here to see even more OEM parts. If you can't find what you need, just give us a call anytime, and we can track down it for you!
2009-2016 Nissan R35 GT-R.
NISSAN |
|
![](../main/right_banners/sale_banner.jpg)
|
|